The coal dryer can dehydrate and dry high-humidity and high-viscosity coal, so as to achieve the purpose of harmlessness, stabilization, reduction and resource treatment of coal, and greatly improve the use value and economic value of coal. Therefore, more and more users use coal dryers. Today, I will share with you some of the advantages of coal dryers to help users have a deeper understanding of coal dryer equipment:
1. The coal dryer adopts a three-cylinder structure, that is, three drums of different diameters are embedded together, which greatly increases the internal volume of the drum, and the processing capacity is three times that of a single-cylinder coal dryer.
2. The coal dryer barrel is equipped with a special dispersing device and a material guide system, which can disperse and stir the feed, speed up the mixing and contact of the material and the hot air, not only can improve the heat utilization rate, but also improve the production efficiency of the equipment.
3. The coal dryer adopts a thermal energy distribution system, and its drying temperature, air volume, and wind speed can be adjusted according to the moisture content of the materials in different drying stages, which greatly saves energy consumption. In addition, there is an insulation layer on the outside of the coal dryer barrel, which can reduce the spillage of smoke and dust in the coal dryer barrel, which not only improves the utilization rate of heat energy, but also saves energy consumption. There is also a professional dust removal device at the end of the system, which can filter, purify and reduce the flue gas and dust generated during the production process, so that it can be discharged after meeting the flue gas emission requirements, and reduce the impact on the environment.
If you have any questions about coal dryer, please feel free to contact us.
Location:Belgian
Project Progress:Put Into Production
Location:Russia
Project Progress:Put Into Production
Location:Vietnam
Project Progress:Put Into Production
Location:Shanxi
Project Progress:Put Into Production