Introduction of maintenance work of chicken manure dryer

1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. Main oil filling:

(1) Rotary bearing

(2) Roll bearing

(3) All gears

(4) Active bearing and sliding plane.

2. The newly installed tires are prone to loosening and must be checked frequently.

3. Pay attention to whether the work of each part of the machine is normal.

4. Pay attention to check the wear degree of the wear-resistant parts, and pay attention to replace the worn parts at any time.

5. On the bottom frame plane of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents.

6. If the bearing oil temperature rises, stop immediately to check the cause and eliminate it.

7. If there is an impact sound when the rotating gear is running, stop it immediately to check and eliminate it.