Palm silk, also known as oil palm silk or palm fiber, is the waste from the production of palm oil. After the special palm silk dryer (oil palm fiber dryer, palm fiber dryer), the moisture content of the finished product is less than 15%, the impurities are less than 3%, the oil content is less than 5%, the silk is clean and the color Nice looking, no mold.

Working principle of palm silk dryer

The special drum dryer for palm silk is mainly composed of a hot blast stove, a feed conveyor, a rotary drum dryer, a discharge conveyor, a dust collector, and a power distribution cabinet; the sorted silk fibers enter the dryer and are stored in the drum. Under the turning of the evenly distributed tooth copying and stirring device, the material is evenly dispersed and fully contacted with the hot air, rapidly heat transfer, mass transfer, drying, and discharge to the drum discharge port.

The selection and design of the technological parameters of the drying production line and the technical parameters and structure of each equipment are obtained through the analysis and research of palm silk, and are verified by the actual drying test. In the design of the scheme, the characteristics of silk fibers that are flammable, easy to agglomerate, and wrapped in bran slag are fully considered, and a series of unique technologies and processes are adopted to solve the problem to ensure good drying effect and cleanliness of silk fibers.

Features of palm silk dryer

1. Designed and manufactured for silk fiber materials, with unique structure, low energy consumption and high thermal efficiency;
2. Unique heating mode, rejecting high temperature and open fire, the color, strength and flexibility of the finished silk fiber before and after drying are unchanged, and the operation is safe;
3. Frequency conversion speed regulation and automatic temperature control, according to the moisture content of silk fiber raw materials, the operating parameters can be set arbitrarily to achieve the required drying effect;
4. With its own slag cleaning device, the silk fiber wraps the slag to complete the refinement, sorting and cleaning during the drying process, and the finished silk fiber is purer;
5. Modular design and manufacture, solid structure, convenient installation, low operation and maintenance cost, and long service life;
6. The dryer can be combined with the wire opener, the screening machine and the packing machine to form a drying production line, or it can be used alone.